To install this fully adjustable link, first remove the original suspension link, by hanging the rear of the bike, so all the weight is off the tire.
Take the stock steel sleeves out othe the stock link. slide them into the new adjustable link. It's that easy. The short end of the adjustable link does not move, it is locktited in.
You use the long end to adjust the height. They are close to the stock height when you revieve them. Be sure to tighten the jam nuts before you install it on the bike. Any questions, just call.
All lowering links just lower the bike the specified amount if you have the stock swingarm on the bike. It will be "less lowered" if you have extensions or a longer swingarm on the bike.
If your bike is stretched 6+ it will only lower the bike 2", and for 4+ over it will lower the bike 2.5".
